text.skipToContent text.skipToNavigation
Promocja dla nowych klientów! Załóż konto, zapisz się do naszego newslettera, a otrzymasz kod -15% na nowe zamówienie!

Podkładki kuliste i stożkowe DIN 6319 C 87239


Numer artykułu 87239AMF
Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose
Zobacz wszystkie specyfikacje 
Pakowane po 1

Specyfikacje

Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose

Normy

DIN 6319-C

Numery artykułów

Numer artykułu 87239AMF
EAN 4020772087234
UBB 500617975569
UNSPSC 31161801
Artykuł producenta nr 87239
Nie zamykaj tej strony. Ten komunikat zniknie, gdy strona zostanie w pełni załadowana.