Nakrętki sześciokątne, izometryczne, do zbiorników ciśnieniowych ISO 4032 Stal Ocynkowane na gorąco 5-2 izometryczna

Numer artykułu
Klasa	5-2
Gniazdo	Hexagon
Materiał	Stal
Kierunek gwintu	Prawy
Obróbka powierzchni	Ocynkowane na gorąco
Gwint	Metryczny
Info	Specific features of fasteners for pressure vessels: Intended for use in pressure vessels, steam appliances, equipment and flange connections at temperatures from -10 °C up to +300 °C. Meets the requirements of AD2000-W7, TRD106 and DIN 267-13. Manufacturers included in VdTÜV-Merkblatt 1253/4 are entitled to replace a certificate EN 10204 3.1 by marking the fasteners with the property class and the manufacturer’s mark. This recognition is equally accepted by Lloyd's Register Energy. ISO metric hot dip galvanized nuts are manufactured with thread tolerance class 6H and mate with externally threaded parts (bolts, threaded rods) that are manufactured with thread tolerance class 6az before coating. As the nut thread is tapped after galvanizing the threads are not coated. The corrosion resistance however is not influenced disadvantageously as the thread will be protected by the zinc layer of the mating part.izometryczna

Zobacz wszystkie specyfikacje

Specyfikacje

Klasa	5-2
Gniazdo	Hexagon
Materiał	Stal
Kierunek gwintu	Prawy
Obróbka powierzchni	Ocynkowane na gorąco
Gwint	Metryczny
Info	Specific features of fasteners for pressure vessels: Intended for use in pressure vessels, steam appliances, equipment and flange connections at temperatures from -10 °C up to +300 °C. Meets the requirements of AD2000-W7, TRD106 and DIN 267-13. Manufacturers included in VdTÜV-Merkblatt 1253/4 are entitled to replace a certificate EN 10204 3.1 by marking the fasteners with the property class and the manufacturer’s mark. This recognition is equally accepted by Lloyd's Register Energy. ISO metric hot dip galvanized nuts are manufactured with thread tolerance class 6H and mate with externally threaded parts (bolts, threaded rods) that are manufactured with thread tolerance class 6az before coating. As the nut thread is tapped after galvanizing the threads are not coated. The corrosion resistance however is not influenced disadvantageously as the thread will be protected by the zinc layer of the mating part.izometryczna

Normy

ISO	4032

Dla tego produktu nie ma dokumentów do pobrania

Ilość produktów ({0})

Pokaż wszystkie warianty

Numer artykułu Twój kod artykułu	Specyfikacja	Stan magazynowy	Cena netto po rabacie	Cena za	Ilość

	Stan magazynowy	Cena netto po rabacie		Zapisz się Poprzedni

Dla wybranego filtra nie znaleziono żadnego wyniku