text.skipToContent text.skipToNavigation

KIPP Indexing plungers with threaded pin, without locknut Metrisches feines Gewinde Steel 5.8, hardened pin Black oxide

Numéro d'article
Marke Kipp
Klasse 5.8
Material Stahl
Oberfläche Schwarzoxidiert
Gewinde Metrisches feines Gewinde
Info Material: Steel grade 5.8.Version: Indexing pin hardened, ground, black oxidized.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation e.g. program controlled pneumatic cylinder or by remote control using Bowden cables.
Voir toutes les spécifications 
Voir toutes les variantes

Spécifications

Marke Kipp
Klasse 5.8
Material Stahl
Oberfläche Schwarzoxidiert
Gewinde Metrisches feines Gewinde
Info Material: Steel grade 5.8.Version: Indexing pin hardened, ground, black oxidized.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation e.g. program controlled pneumatic cylinder or by remote control using Bowden cables.

Produits ({0})

Afficher toutes les variantes
  Stock Prix net   S'inscrire
Ne fermez pas cette page. Ce message disparaîtra lorsque la page sera entièrement téléchargée.