Piuliță hexagonală îngustă DIN 439 2 Oțel inoxidabil A2 035 filet de stânga

Cod Articol
Clasă	035
Tip antrenare	Hexagon
Material	Oțel inoxidabil
Material tehnic	A2
Direcție filet	Stânga (LH)
Filete	Filet metric
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Vedeți toate specificațiile

Specificații

Clasă	035
Tip antrenare	Hexagon
Material	Oțel inoxidabil
Material tehnic	A2
Direcție filet	Stânga (LH)
Filete	Filet metric
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Pentru acest produs nu există documente disponibile pentru descărcare

Cod articol Numărul tău cod articol	Specificații	Stoc	Preț Net	Preț pe	Cantitate

	Stoc	Preț Net		Inscrie-te Anterior

Nici un rezultat găsit pentru acest filtru