Șaibe de poziționare pt. canale T DIN 6319 C 82040

Cod Articol	82040AMF
Info	F max = Maximum recommended static load (values do not apply to stainless steel) These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose

Vedeți toate specificațiile

Ambalat la 10

Exclusiv împachetare

Specificații

Info	F max = Maximum recommended static load (values do not apply to stainless steel) These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose

Descărcați ca PDF Imprimare

DIN	6319-C