text.skipToContent text.skipToNavigation
Kedves Vásárló! Az ünnepek miatt az Ön rendelésének kiszállítása a szokásosnál kicsit tovább tarthat. Kérjük, hogy rendelését időben adja le. Boldog decemberi hónapot kívánunk.

Lencsés alátét DIN 6319 C 82016


Cikkszám 82016AMF
Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose
Tekintse meg az összes specifikációt 
Csomagolás: 1

Műszaki adatok

Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose

Szabványok

DIN 6319-C

Cikkszámok

Cikkszám 82016AMF
EAN 4020772082017
UBB 500617922926
UNSPSC 31161801
Gyártó cikksz 82016
Ne zárja be ezt az oldalt. Ez az üzenet eltűnik, amikor az oldal teljesen betöltődik.