text.skipToContent text.skipToNavigation

Fischer termoz cn 8/110 semleges


The fischer termoz CN is ideal for fixing pressure-resistant insulation 400 mm thick such as polystyrene boards or mineral wool boards, wood wool lightweight panels in concrete, solid and perforated brick, lightweight aggregate concrete and aerated concrete securely. The European Technical Assessment guarantees a secure hold. The fischer termoz CN compr

Teljes leírás 
Cikkszám 507418FIS
Hosszúság (mm) 108
Fúrólyuk átmérője (mm) 8
Márka Fischer
Tárcsa ø (mm) 60
Fő jellemzők Functioning - Hammerset fixings for the installation of ETIC-Systems in all standard masonry materials. - By hammering in the compound nail, the fixing is anchored into the substrate. - Quick and easy installation per hammering in the compound nail with a hammer. - Embedment depth of min. 35 mm in the substrate is needed. - Non bearing layers such as adhesives and old render are to be included in the required useful length.
Tekintse meg az összes specifikációt 
Csomagolás: 1

Műszaki adatok

Hosszúság (mm) 108
Fúrólyuk átmérője (mm) 8
Márka Fischer
Tárcsa ø (mm) 60
Fő jellemzők Functioning - Hammerset fixings for the installation of ETIC-Systems in all standard masonry materials. - By hammering in the compound nail, the fixing is anchored into the substrate. - Quick and easy installation per hammering in the compound nail with a hammer. - Embedment depth of min. 35 mm in the substrate is needed. - Non bearing layers such as adhesives and old render are to be included in the required useful length.
ETA által jóváhagyott Yes
Darabonkénti súly (g) 19.377
Info
  • do = Nominal diameter of drill bit.
  • tfix = Grip range.
  • hef = Effective anchorage depth.
  • Min. td = Recommended drilling depth.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Leírás

The fischer termoz CN is ideal for fixing pressure-resistant insulation 400 mm thick such as polystyrene boards or mineral wool boards, wood wool lightweight panels in concrete, solid and perforated brick, lightweight aggregate concrete and aerated concrete securely. The European Technical Assessment guarantees a secure hold. The fischer termoz CN comprises a grey plug sleeve with attached disc and a compound nail. The termoz CN is set with a hammer. Alongside the small drill hole depth, this saves time and money during installation. The steel point of the compound nail guarantees high holding forces. Thanks to the flat plug disc, a cheap, thin reinforced plaster layer can be applied.

Cikkszámok

Cikkszám 507418FIS
EAN 4048962080988
UBB 500616752811
UNSPSC 31162101
Gyártó cikksz 507418
Ne zárja be ezt az oldalt. Ez az üzenet eltűnik, amikor az oldal teljesen betöltődik.