Fischer sha ms kábelköteg

The fischer installation base MS is for suspending the fischer cable harness SHA. When using the ClipFix SD to fix the installation base, no additional screw is required. During mounting with the Hammerfix N, the nail screw causes the plug sleeve to expand against the drill hole wall when it is hammered in.

Teljes leírás

Cikkszám	58141FIS
Hossz
Alkalmas az áramkör integritására	Nem
Márka	FISCHER
Fő jellemzők	Functioning - Cable bundles can be laid in the cable harness SHA. The seal makes it easy to lay cables at a later date. - The cable harness SHA can either be affixed with ClipFix plus, installation base MS or with plugs and screws. - Several SHA cable harnesses can be combined below one another. - The SHA cable harnesses can also be lined up adjacent to one another with the connection piece SHA KP. - The maximum installation distance of 80 cm must not be exceeded. - Temperature resistance once installed from -20°C to +80°C.

Tekintse meg az összes specifikációt

Csomagolás: 1

Specifikációk és szabványok
Letöltések

Műszaki adatok

Hossz	27 mm
Alkalmas az áramkör integritására	Nem
Márka	FISCHER
Fő jellemzők	Functioning - Cable bundles can be laid in the cable harness SHA. The seal makes it easy to lay cables at a later date. - The cable harness SHA can either be affixed with ClipFix plus, installation base MS or with plugs and screws. - Several SHA cable harnesses can be combined below one another. - The SHA cable harnesses can also be lined up adjacent to one another with the connection piece SHA KP. - The maximum installation distance of 80 cm must not be exceeded. - Temperature resistance once installed from -20°C to +80°C.

Pdf letöltése Nyomtatás

Leírás

Cikkszámok

Cikkszám	58141FIS
EAN	4006209581414
UBB	500616761077
UNSPSC	31162905
Gyártó cikksz	58141

Ehhez a termékhez nincsenek letölthető dokumentumok