text.skipToContent text.skipToNavigation

Fischer fna ii 6x30/60 r szöghorony


The fischer nail anchor FNA II 6 with nail head is made of stainless steel. The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail

Cikkszám 46025FIS
Hosszúság (mm) 97.5
Menetméret (metrikus) 6
Fúrólyuk átmérője (mm) 6
Önfúró Nem
Maximális szorítóvastagság (mm) 60
Csomagolás: 1

Műszaki adatok

Hosszúság (mm) 97.5
Menetméret (metrikus) 6
Fúrólyuk átmérője (mm) 6
Önfúró Nem
Maximális szorítóvastagság (mm) 60
Márka Fischer
Darabonkénti súly (g) 23.762
Info
  • Drill depth (min.) for through fixing.
  • Allowable loads in kN are valid for non-structural applications.
  • Required safety factors are taken into account.

Leírás

The fischer nail anchor FNA II 6 with nail head is made of stainless steel. The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II 6 with nail head is suitable for fixing mounting rails and timber or sub-constructions in external areas.

Cikkszámok

Cikkszám 46025FIS
EAN 4006209460252
UBB 500616650502
UNSPSC 31162103
Gyártó cikksz 46025
Ne zárja be ezt az oldalt. Ez az üzenet eltűnik, amikor az oldal teljesen betöltődik.