text.skipToContent text.skipToNavigation

Fischer fna ii 6x30/30 r szöghorony


The fischer nail anchor FNA II 6 with nail head is made of stainless steel. The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail

Teljes leírás 
Cikkszám 44123FIS
Minimális fúrásmélység (mm) 70
Hosszúság (mm) 67.5
Menetméret (metrikus) 6
Fúrólyuk átmérője (mm) 6
Önfúró Nem
Tekintse meg az összes specifikációt 
Csomagolás: 1

Műszaki adatok

Minimális fúrásmélység (mm) 70
Hosszúság (mm) 67.5
Menetméret (metrikus) 6
Fúrólyuk átmérője (mm) 6
Önfúró Nem
Alkalmazott terhelés húzási zóna (kN) 1.2
Jóváhagyással Igen
Maximális szorítóvastagság (mm) 30
Márka Fischer
Fő jellemzők Functioning - The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and push-through installation. The FNA II OE and H are suitable for pre-positioned installation. - The installed FNA II nail anchor expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall. - Available setting tools:FNA S-SBO to slip onto the drill,FNA S-SDS for series installation with a drilling hammer,FNA S-H for the manual installation of mounting rails.
ETA által jóváhagyott Yes
Darabonkénti súly (g) 16.436
Info
  • Drill depth (min.) for through fixing.
  • Allowable loads in kN are valid for non-structural applications.
  • Required safety factors are taken into account.

Leírás

The fischer nail anchor FNA II 6 with nail head is made of stainless steel. The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II 6 with nail head is suitable for fixing mounting rails and timber or sub-constructions in external areas.

Cikkszámok

Cikkszám 44123FIS
EAN 4006209441237
UBB 500616644265
UNSPSC 31162103
Gyártó cikksz 44123
Ne zárja be ezt az oldalt. Ez az üzenet eltűnik, amikor az oldal teljesen betöltődik.