text.skipToContent text.skipToNavigation

Fischer fis a m16x130 r menetes rúd


The fischer threaded rod FIS A is made from stainless steel. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the syst

Teljes leírás 
Cikkszám 44975FIS
Átmérő
Hossz
Kialakítás Csapvéggel
Hosszúság 130
Menetméret (metrikus) 16
Tekintse meg az összes specifikációt 
Csomagolás: 1

Műszaki adatok

Átmérő M16
Hossz 130 mm
Kialakítás Csapvéggel
Hosszúság 130
Menetméret (metrikus) 16
Fúrólyuk átmérője (mm) 18
Hatékony rögzítési mélység (mm) 80
Gyantakapszulával Nem
ETA által jóváhagyott Yes
Info
  • The allowable load is valid for one single anchor, at non-cracked concrete (pressure zone) with concrete class C20/25, in combination with bolt class 5.8 and if the Scr, N and Ccr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out.
  • For a complete chemical fixing, the resin capsule and internal threaded anchor have to be ordered separately. Setting tool is enclosed in each packing.

Leírás

The fischer threaded rod FIS A is made from stainless steel. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system of stainless steel threaded rods in combination with fischer injection mortars is suitable and approved for fixings outside and in damp rooms without aggressive conditions.

Cikkszámok

Cikkszám 44975FIS
EAN 4006209449752
UBB 500616648639
UNSPSC 31161601
Gyártó cikksz 44975
Ne zárja be ezt az oldalt. Ez az üzenet eltűnik, amikor az oldal teljesen betöltődik.