text.skipToContent text.skipToNavigation

Fischer fhb ii-a s m20x170/50 a4 ragasztott horgony


The fischer Highbond rod anchor FHB II-A S A4 is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill

Teljes leírás 
Cikkszám 506919FIS
Átmérő
Kialakítás Csapvéggel
Hosszúság (mm) 266
Menetméret (metrikus) 20
Fúrólyuk átmérője (mm) 25
Tekintse meg az összes specifikációt 
Csomagolás: 1

Műszaki adatok

Átmérő M20
Kialakítás Csapvéggel
Hosszúság (mm) 266
Menetméret (metrikus) 20
Fúrólyuk átmérője (mm) 25
Hatékony rögzítési mélység (mm) 170
Gyantakapszulával Nem
Márka Fischer
Darabonkénti súly (g) 693.075
Info
  • do= Nominal diameter of drill bit.
  • Min. td= Recommended drilling depth.
  • hef= Effective anchorage depth.
  • tfix= Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Leírás

The fischer Highbond rod anchor FHB II-A S A4 is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, railings, and steel constructions are securely installed within external areas.

Cikkszámok

Cikkszám 506919FIS
EAN 4048962078329
UBB 500616667365
UNSPSC 31162101
Gyártó cikksz 506919
Ne zárja be ezt az oldalt. Ez az üzenet eltűnik, amikor az oldal teljesen betöltődik.