text.skipToContent text.skipToNavigation

Fischer fhb ii-a s m16x95/165 a4 ragasztott horgony


The fischer Highbond rod anchor FHB II-A S A4 is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill

Teljes leírás 
Cikkszám 97644FIS
Átmérő
Kialakítás Csapvéggel
Hosszúság (mm) 295
Menetméret (metrikus) 16
Fúrólyuk átmérője (mm) 16
Tekintse meg az összes specifikációt 
Csomagolás: 1

Műszaki adatok

Átmérő M16
Kialakítás Csapvéggel
Hosszúság (mm) 295
Menetméret (metrikus) 16
Fúrólyuk átmérője (mm) 16
Hatékony rögzítési mélység (mm) 95
Gyantakapszulával Nem
Márka Fischer
Darabonkénti súly (g) 397.43
Info
  • do= Nominal diameter of drill bit.
  • Min. td= Recommended drilling depth.
  • hef= Effective anchorage depth.
  • tfix= Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Leírás

The fischer Highbond rod anchor FHB II-A S A4 is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, railings, and steel constructions are securely installed within external areas.

Cikkszámok

Cikkszám 97644FIS
EAN 4006209976449
UBB 500616712310
UNSPSC 31162101
Gyártó cikksz 97644
Ne zárja be ezt az oldalt. Ez az üzenet eltűnik, amikor az oldal teljesen betöltődik.