text.skipToContent text.skipToNavigation

Fischer fhb-a dyn 20x170/50 ragasztott horgony


The fischer Highbond anchor dynamic FHB-A dyn is made of zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. During the setting process, the injection mortar FI

Teljes leírás 
Cikkszám 92037FIS
Kialakítás Csapvéggel
Hosszúság (mm) 260
Menetméret (metrikus) 20
Fúrólyuk átmérője (mm) 24
Hatékony rögzítési mélység (mm) 170
Tekintse meg az összes specifikációt 
Csomagolás: 1

Műszaki adatok

Kialakítás Csapvéggel
Hosszúság (mm) 260
Menetméret (metrikus) 20
Fúrólyuk átmérője (mm) 24
Hatékony rögzítési mélység (mm) 170
Gyantakapszulával Nem
Márka Fischer
DIBt-approval Yes
Darabonkénti súly (g) 817.6
Info
  • Ccr, N = Characteristic Edge distance (tensile).
  • Cmin. = Minimum edge distance (tensile).
  • df = Hole diameter in fixture.
  • do = Hole diameter in substrate.
  • hef = Effective embedment depth.
  • hmin = Minimum substrate thickness.
  • ho = Minimum hole depth.
  • Scr, N = Characteristic spacing.
  • Concrete C20/25 recommended load for non-cracked concrete.
  • The allowable load is only valid for AcryMaxx Chemical Mortar in combination with Anchor studs, steel grade 5.8.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Leírás

The fischer Highbond anchor dynamic FHB-A dyn is made of zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and guarantees optimum load distribution. This allows for the absorption of dynamic alternating loads. The fischer Highbond anchor dynamic FHB-A dyn is ideally suited for fixing guide rails for elevators, industrial robots, or mobile portal and ceiling cranes in internal areas.

Cikkszámok

Cikkszám 92037FIS
EAN 4006209920374
UBB 500616702253
UNSPSC 31161601
Gyártó cikksz 92037
Ne zárja be ezt az oldalt. Ez az üzenet eltűnik, amikor az oldal teljesen betöltődik.