text.skipToContent text.skipToNavigation

D-fejű, kereszthornyos menetmetsző csavar DIN 7516 AE-H Acél Horganyzott

Previous Next
Article number
Márka Fabory
Behajtási tulajdonságok Phillips
Fej alak Domborított hengeres fej
Anyag Acél
Felületkezelés Horganyzott
Menetek Metrikus menet
Info
  • The predrill diamerter Drill ø (H11) is a guideline for medium strength material. For soft or thin materials a smaller hole can be chosen, for hard or thick material a bigger hole may be chosen. It is recommended to select the exact diameter based on tests.
  • The engagement depth should by no means exceed twice the nominal screw diamerter.
    • Warning: electroplating of these products may cause hydrogen embrittlement.
View all specifications 
View all variants

Specifications

Márka Fabory
Behajtási tulajdonságok Phillips
Fej alak Domborított hengeres fej
Anyag Acél
Felületkezelés Horganyzott
Menetek Metrikus menet
Info
  • The predrill diamerter Drill ø (H11) is a guideline for medium strength material. For soft or thin materials a smaller hole can be chosen, for hard or thick material a bigger hole may be chosen. It is recommended to select the exact diameter based on tests.
  • The engagement depth should by no means exceed twice the nominal screw diamerter.
    • Warning: electroplating of these products may cause hydrogen embrittlement.

Standards

DIN 7516-AE H

Products ({0})

Show all variants
  Stock Net price   Sign up
Do not close this page. This message will disappear, when the page is fully loaded.