text.skipToContent text.skipToNavigation

Závitořezný šroub se zápustnou hlavou s křížovou drážkou DIN 7516de DIN 7516 DE-T Oceľ Pozinkované

Numéro d'article
Značka Fabory
Tvar hlavy So zapustenou hlavou
Materiál Oceľ
Smer závitu Pravý
Vlastnosti povrchu Pozinkované
Závit Metrický závit
Info
  • The predrill diamerter Drill ø (H11) is a guideline for medium strength material. For soft or thin materials a smaller hole can be chosen, for hard or thick material a bigger hole may be chosen. It is recommended to select the exact diameter based on tests.
  • The engagement depth should by no means exceed twice the nominal screw diamerter.

Spécifications

Značka Fabory
Tvar hlavy So zapustenou hlavou
Materiál Oceľ
Smer závitu Pravý
Vlastnosti povrchu Pozinkované
Závit Metrický závit
Info
  • The predrill diamerter Drill ø (H11) is a guideline for medium strength material. For soft or thin materials a smaller hole can be chosen, for hard or thick material a bigger hole may be chosen. It is recommended to select the exact diameter based on tests.
  • The engagement depth should by no means exceed twice the nominal screw diamerter.

Produits ({0})

  Stock Prix net   S'inscrire
Ne fermez pas cette page. Ce message disparaîtra lorsque la page sera entièrement téléchargée.