Spiralock Šesťhranná poistná matica s prírubou ISO 4161 Nerezoceľ A4

Položka č.
Vlastnosti nákrutky	Šestihran
Materiál	Nerezoceľ
Technický materiál	A4
Smer závitu	Pravý
Závit	Metrický závit
Info	Thanks to its unique thread configuration the Spiralock flange nut offers a perfect solution where a joint must be reliably tightened and locked.Benefits of the Spiralock flange nut are a.o.: Exceptionally resistant to vibration loosening Eliminates need for other locking devices Accepts standard male fasteners (with thread tolerance class 4g6g, 6g, 6h and MJ) Improves joint fatigue life Consistent reusability Eases assembly, reducing assembly time Reduces life cycle cost of threaded jointsBecause of the Spiralock design, threaded joints generally require 10% - 20% greater torque than is required for standard joints, due to the redirecting of some assembly forces from an axial direction to a radial direction. The increase in torque will vary depending on the types of materials and coatings being used (nut, bolt, joint, etc.). This torque/tension relationship should be evaluated in the actual joint to determine the proper torque required to develop the specified tension. Guidance available through our Technology Department.

Pozrite si všetky špecifikácie

technické údaje

Vlastnosti nákrutky	Šestihran
Materiál	Nerezoceľ
Technický materiál	A4
Smer závitu	Pravý
Závit	Metrický závit
Info	Thanks to its unique thread configuration the Spiralock flange nut offers a perfect solution where a joint must be reliably tightened and locked.Benefits of the Spiralock flange nut are a.o.: Exceptionally resistant to vibration loosening Eliminates need for other locking devices Accepts standard male fasteners (with thread tolerance class 4g6g, 6g, 6h and MJ) Improves joint fatigue life Consistent reusability Eases assembly, reducing assembly time Reduces life cycle cost of threaded jointsBecause of the Spiralock design, threaded joints generally require 10% - 20% greater torque than is required for standard joints, due to the redirecting of some assembly forces from an axial direction to a radial direction. The increase in torque will vary depending on the types of materials and coatings being used (nut, bolt, joint, etc.). This torque/tension relationship should be evaluated in the actual joint to determine the proper torque required to develop the specified tension. Guidance available through our Technology Department.

ISO	4161

Pre tento produkt nie sú dostupné žiadne dokumenty na stiahnutie

Číslo položky Vaše číslo položky	Špecifikácie	Sklad	Čistá cena	Cena za	Množstvo

	Sklad	Čistá cena		PRIHLÁSIŤ SA Predchádzajúce

Pre tento filter sa nenašli žiadne výsledky