text.skipToContent text.skipToNavigation
Chceli by sme Vás informovať, že v termíne od 21.12.2024 do 01.01.2025 bude zákaznícky servis zatvorený . Vaše objednávky a požiadavky budú spracované od 02.01.2025. Ďakujeme za pochopenie a prajeme krásne sviatky!

Sférická a kužeľová podložka DIN 6319 C 87254


Položka č. 87254AMF
Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose
Ambalat la 1

technické údaje

Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose

Normy

DIN 6319-C

Čísla materiálu

Položka č. 87254AMF
EAN 4020772087258
UBB 500617975643
UNSPSC 31161801
Číslo materiálu výrobcu 87254
Nezatvárajte túto stránku. Táto správa zmizne, keď sa stránka úplne načíta.