text.skipToContent text.skipToNavigation

Tanierová pružina na kritické aplikácie typ C (ľahká) EN 16983 C Oceľ acc. to EN 16983 Fosfátované

Previous Next
Numéro d'article
Značka Fabory
Materiál Oceľ
Technický materiál acc. to EN 16983
Vlastnosti povrchu Fosfátované
Info
  • Warning: electroplating of these products may cause hydrogen embrittlement.
    • F = spring load in Newton at a deflection s ≈ 0,75 h0 (h0 = l0 - t).
    • The values specified for t are nominal values. In the case of springs with 6 ˂ t ≤ 14 the desired spring load F is to be obtained by reducing the thickness of single disc springs t to the values between brackets.
    • Refer to EN 16984 for calculation of disc springs.
    • Extensive technical data available on request.
Voir toutes les spécifications 
Voir toutes les variantes

Spécifications

Značka Fabory
Materiál Oceľ
Technický materiál acc. to EN 16983
Vlastnosti povrchu Fosfátované
Info
  • Warning: electroplating of these products may cause hydrogen embrittlement.
    • F = spring load in Newton at a deflection s ≈ 0,75 h0 (h0 = l0 - t).
    • The values specified for t are nominal values. In the case of springs with 6 ˂ t ≤ 14 the desired spring load F is to be obtained by reducing the thickness of single disc springs t to the values between brackets.
    • Refer to EN 16984 for calculation of disc springs.
    • Extensive technical data available on request.

Normes

EN 16983-C
DIN 2093-C

Produits ({0})

Afficher toutes les variantes
  Stock Prix net   S'inscrire
Ne fermez pas cette page. Ce message disparaîtra lorsque la page sera entièrement téléchargée.