text.skipToContent text.skipToNavigation

Anilha cónica e esférica DIN 6319 C 82032


Referência 82032AMF
Diâmetro interior (mm) 23.2
Adequado para o tamanho do parafuso (métrico) 20
Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose
Embalado por 1

Especificações

Diâmetro interior (mm) 23.2
Adequado para o tamanho do parafuso (métrico) 20
Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose

Padrões

DIN 6319-C

Números do artigo

Referência 82032AMF
EAN 4020772082031
UBB 500617923189
UNSPSC 31161801
Artigo do fabricante nr 82032
Não feche esta página. Esta mensagem desaparecerá, quando a página estiver totalmente carregada.