text.skipToContent text.skipToNavigation
Estimado cliente, devido ao período festivo, o envio da sua encomenda pode demorar um pouco mais do que o normal. Por favor, planeia a sua encomenda com mais antecedência. Desejamos-lhe um feliz mês de Dezembro.

Anilha cónica e esférica DIN 6319 C 81844


Referência 81844AMF
Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose
Veja todas as especificações 
Embalado por 1

Especificações

Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose

Padrões

DIN 6319-C

Números do artigo

Referência 81844AMF
EAN 4020772081843
UBB 500617922272
UNSPSC 31161801
Artigo do fabricante nr 81844
Não feche esta página. Esta mensagem desaparecerá, quando a página estiver totalmente carregada.