text.skipToContent text.skipToNavigation
Chtěli bychom vás informovat, že v termínu od 21. 12. 2024 do 1. 1. 2025 bude zákaznický servis uzavřen. Vaše objednávky a požadavky budou zpracovány od 2. 1. 2025. Děkujeme za pochopení a přejeme krásné svátky!

Sférická a kuželová podložka DIN 6319 C 82057


Objednací číslo 82057AMF
Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose
Zobrazit všechny specifikace 
Baleno po 1

Specifikace

Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose

Normy

DIN 6319-C

Čísla materiálu

Objednací číslo 82057AMF
EAN 4020772082055
UBB 500617923346
UNSPSC 31161801
Výrobní číslo položky 82057
Tuto stránku nezavírejte. Tato zpráva zmizí, jakmile se stránka zcela načte.