text.skipToContent text.skipToNavigation

Kuželové pánvičky DIN 6319g DIN 6319 G Ocel Bez PU

Objednací číslo
Materiál Ocel
Povrchová úprava Bez PU
Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These conical seats are often combined with spherical washers DIN 6319-C. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these conical seats are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2.
  • These conical seats can be used with slotted holes.

Specifikace

Materiál Ocel
Povrchová úprava Bez PU
Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These conical seats are often combined with spherical washers DIN 6319-C. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these conical seats are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2.
  • These conical seats can be used with slotted holes.

Normy

DIN 6319-G

Produktů ({0})

  Sklad Čistá cena   Přihlásit se
Tuto stránku nezavírejte. Tato zpráva zmizí, jakmile se stránka zcela načte.