text.skipToContent text.skipToNavigation
Chtěli bychom vás informovat, že v termínu od 21. 12. 2024 do 1. 1. 2025 bude zákaznický servis uzavřen. Vaše objednávky a požadavky budou zpracovány od 2. 1. 2025. Děkujeme za pochopení a přejeme krásné svátky!

KIPP Indexing plungers without collar, with threaded pin Svařitelná nerezová ocel 1.4301, tvrzený čep

Objednací číslo
Značka Kipp
Materiál Nerezocel
Technický materiál 1.4301
Info Material: Stainless steel Sleeve 1.4301 weldable. Indexing pin 1.4034. Mushroom knob black grey thermoplastic.Version: Indexing pin hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for actuation of the locking bolt e.g. automatically (program-controlled) with the aid of a pneumatic cylinder or remote controlled with Bowden cables. To weld the indexing plungers we recommend inert gas shielded welding with TIG welding equipment.

Specifikace

Značka Kipp
Materiál Nerezocel
Technický materiál 1.4301
Info Material: Stainless steel Sleeve 1.4301 weldable. Indexing pin 1.4034. Mushroom knob black grey thermoplastic.Version: Indexing pin hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for actuation of the locking bolt e.g. automatically (program-controlled) with the aid of a pneumatic cylinder or remote controlled with Bowden cables. To weld the indexing plungers we recommend inert gas shielded welding with TIG welding equipment.

Produktů ({0})

  Sklad Čistá cena   Přihlásit se
Tuto stránku nezavírejte. Tato zpráva zmizí, jakmile se stránka zcela načte.