text.skipToContent text.skipToNavigation
Chtěli bychom vás informovat, že v termínu od 21. 12. 2024 do 1. 1. 2025 bude zákaznický servis uzavřen. Vaše objednávky a požadavky budou zpracovány od 2. 1. 2025. Děkujeme za pochopení a přejeme krásné svátky!

KIPP Indexing plungers without collar, with key ring Svařitelná ocel 1.0403 / 5.8, tvrzený čep Černý oxid

Objednací číslo
Značka Kipp
Třída 5.8
Materiál Ocel
Povrchová úprava Black Oxide
Info Material: Steel. Sleeve 1.0403 weldable. Indexing pin grade 5.8. Key ring 1.4310, bright.Version: Indexing pin hardened, ground, black oxidized.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. The key ring is also suitable for actuating the indexing plungers e.g. automatically (program-controlled) with the aid of a pneumatic cylinder or remote controlled with Bowden cables. To weld the indexing plungers we recommend inert gas shielded welding with TIG welding equipment.

Specifikace

Značka Kipp
Třída 5.8
Materiál Ocel
Povrchová úprava Black Oxide
Info Material: Steel. Sleeve 1.0403 weldable. Indexing pin grade 5.8. Key ring 1.4310, bright.Version: Indexing pin hardened, ground, black oxidized.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. The key ring is also suitable for actuating the indexing plungers e.g. automatically (program-controlled) with the aid of a pneumatic cylinder or remote controlled with Bowden cables. To weld the indexing plungers we recommend inert gas shielded welding with TIG welding equipment.

Produktů ({0})

  Sklad Čistá cena   Přihlásit se
Tuto stránku nezavírejte. Tato zpráva zmizí, jakmile se stránka zcela načte.