KIPP Indexing plungers with threaded pin, without collar, with locknut Metrický jemný závit Ocel 5.8, tvrzený čep Černý oxid

Objednací číslo
Značka	Kipp
Třída	5.8
Materiál	Ocel
Povrchová úprava	Black Oxide
Závit	Metrický jemný závit
Info	Material: Steel grade 5.8. Mushroom knob black grey thermoplastic.Version: Indexing pin hardened, ground, black oxidized.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation by e.g. program controlled pneumatic cylinder or by remote control using Bowden cables. A screw-in washer can be supplied to help screw in the indexing plungers. The washer is slid beneath the disengaged mushroom knob so that the carrier pins engage in the slot.

Zobrazit všechny specifikace

Specifikace

Značka	Kipp
Třída	5.8
Materiál	Ocel
Povrchová úprava	Black Oxide
Závit	Metrický jemný závit
Info	Material: Steel grade 5.8. Mushroom knob black grey thermoplastic.Version: Indexing pin hardened, ground, black oxidized.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation by e.g. program controlled pneumatic cylinder or by remote control using Bowden cables. A screw-in washer can be supplied to help screw in the indexing plungers. The washer is slid beneath the disengaged mushroom knob so that the carrier pins engage in the slot.

K tomuto produktu nejsou k dispozici žádné dokumenty ke stažení

Produktů ({0})

Zobrazit všechny varianty

Objednací číslo Vaše objednací číslo	Specifikace	Sklad	Čistá cena	Cena za	Množství

	Sklad	Čistá cena		Přihlásit se Předchozí

Pro tento filtr nebyly nalezeny žádné výsledky.