KIPP Indexing plungers with tapered pin, premium Metrický jemný závit Ocel 5.8, plastová rukojeť Černý oxid

Objednací číslo
Značka	Kipp
Třída	5.8
Materiál	Ocel
Povrchová úprava	Black Oxide
Závit	Metrický jemný závit
Info	Material: Steel grade 5.8 Mushroom knob black grey thermoplastic.Version: indexing pin hardened, ground and black oxidized.Note: Premium indexing plungers are characterized by more stringent manufacturing requirements for the indexing plungers and threaded sleeve. In addition, a centering locator that can be used to increase the positioning accuracy is provided on the threaded sleeve. These indexing plungers are used when it is necessary to prevent shifting of the locked position by transverse forces and greater positioning accuracy is required. A new locking position can only be set after the pin has been manually disengaged. When high lateral forces are to be expected, the centering locator should be used.Assembly: When using the threaded sleeve centering, it is recommended the receiving reamed hole be machined before tapping. The conical contact surface is aligned by the threaded sleeve and locking nut.

Zobrazit všechny specifikace

Specifikace

Značka	Kipp
Třída	5.8
Materiál	Ocel
Povrchová úprava	Black Oxide
Závit	Metrický jemný závit
Info	Material: Steel grade 5.8 Mushroom knob black grey thermoplastic.Version: indexing pin hardened, ground and black oxidized.Note: Premium indexing plungers are characterized by more stringent manufacturing requirements for the indexing plungers and threaded sleeve. In addition, a centering locator that can be used to increase the positioning accuracy is provided on the threaded sleeve. These indexing plungers are used when it is necessary to prevent shifting of the locked position by transverse forces and greater positioning accuracy is required. A new locking position can only be set after the pin has been manually disengaged. When high lateral forces are to be expected, the centering locator should be used.Assembly: When using the threaded sleeve centering, it is recommended the receiving reamed hole be machined before tapping. The conical contact surface is aligned by the threaded sleeve and locking nut.

K tomuto produktu nejsou k dispozici žádné dokumenty ke stažení

Produktů ({0})

Zobrazit všechny varianty

Objednací číslo Vaše objednací číslo	Specifikace	Sklad	Čistá cena	Cena za	Množství

	Sklad	Čistá cena		Přihlásit se Předchozí

Pro tento filtr nebyly nalezeny žádné výsledky.