Fischer fbn ii 10/10 hdg bolt anchor

Šroubová kotva fischer FBN II je ocelová kotva pro cenově výhodné upevnění do betonu bez trhlin. Díky dlouhému závitu a dvěma kotevním hloubkám lze šroubovou kotvu fischer FBN II použít obzvláště flexibilně. Šroubová kotva je vhodná jak pro montáž na stojato, tak pro předsazenou montáž a pro montáž s protlačením. Šroubová kotva je vyrobena ze žárově ponořené oceli a je vhodná pro zábradlí, madla nebo konzoly.

Full description

Article number	507579FIS
Diameter
Length
Wrench width (mm)	17
Thread length (mm)	46
Min. Bohrlochtiefe (mm)	78

View all specifications

Packed per 1

Specifications & standards
Downloads

Specifications

Diameter	M10
Length	46 mm
Wrench width (mm)	17
Thread length (mm)	46
Min. Bohrlochtiefe (mm)	78
Länge (mm)	86
Thread type	Metric
Thread size (metric)	10
Durchmesser des Bohrlochs (mm)	10
Number of washers	1
Befestigungsart	Mutter
Bracing	Split anchor
Number of nuts	1
Durchsteckmontage	Ja
Vorpositionierter Einbau	Ja
Abstandsmontage	Nein
Max. clamping thickness (mm)	10
Surface protection anchor	Hot-dip galvanized
With collar	No
Fastening by expander tool	No
Anchor model	External thread
Brand	Fischer
Key features	Functioning - The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions. - Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). - When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall. - The head embossing offers a simple control of the anchoring. - In the case of series installation, we recommend using the FABS bolt anchor setting tool.
Gewicht pro Stück (g)	58.16
Info	d_o= Nominal diameter of drill bit. t_fix= Grip range. h_ef= Effective anchorage depth. Min. t_d= Recommended drilling depth. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Commodity code	7318190090

Download as PDF Print

Description

Article numbers

Article number	507579FIS
EAN	4048962087666
UBB	500616668769
UNSPSC	31162101
Manufacturer article nr	507579

Download as PDF Print

Download additional information