Šestihranná matice ISO metrický závit, pro tlakové nádoby ISO 4032 Ocel Žárový zinek 5-2 ISO metrický

Objednací číslo
Třída	5-2
Typ drážky	Šestihran
Materiál	Ocel
Směr závitu	Pravý
Povrchová úprava	Žárový zinek
Závit	Metrický závit
Info	Specific features of fasteners for pressure vessels: Intended for use in pressure vessels, steam appliances, equipment and flange connections at temperatures from -10 °C up to +300 °C. Meets the requirements of AD2000-W7, TRD106 and DIN 267-13. Manufacturers included in VdTÜV-Merkblatt 1253/4 are entitled to replace a certificate EN 10204 3.1 by marking the fasteners with the property class and the manufacturer’s mark. This recognition is equally accepted by Lloyd's Register Energy. ISO metric hot dip galvanized nuts are manufactured with thread tolerance class 6H and mate with externally threaded parts (bolts, threaded rods) that are manufactured with thread tolerance class 6az before coating. As the nut thread is tapped after galvanizing the threads are not coated. The corrosion resistance however is not influenced disadvantageously as the thread will be protected by the zinc layer of the mating part.ISO metrický

Zobrazit všechny specifikace

Specifikace

Třída	5-2
Typ drážky	Šestihran
Materiál	Ocel
Směr závitu	Pravý
Povrchová úprava	Žárový zinek
Závit	Metrický závit
Info	Specific features of fasteners for pressure vessels: Intended for use in pressure vessels, steam appliances, equipment and flange connections at temperatures from -10 °C up to +300 °C. Meets the requirements of AD2000-W7, TRD106 and DIN 267-13. Manufacturers included in VdTÜV-Merkblatt 1253/4 are entitled to replace a certificate EN 10204 3.1 by marking the fasteners with the property class and the manufacturer’s mark. This recognition is equally accepted by Lloyd's Register Energy. ISO metric hot dip galvanized nuts are manufactured with thread tolerance class 6H and mate with externally threaded parts (bolts, threaded rods) that are manufactured with thread tolerance class 6az before coating. As the nut thread is tapped after galvanizing the threads are not coated. The corrosion resistance however is not influenced disadvantageously as the thread will be protected by the zinc layer of the mating part.ISO metrický

Normy

ISO	4032

K tomuto produktu nejsou k dispozici žádné dokumenty ke stažení

Produktů ({0})

Zobrazit všechny varianty

Objednací číslo Vaše objednací číslo	Specifikace	Sklad	Čistá cena	Cena za	Množství

	Sklad	Čistá cena		Přihlásit se Předchozí

Pro tento filtr nebyly nalezeny žádné výsledky.