text.skipToContent text.skipToNavigation

Conical seat DIN 6319 D Nerezoceľ A2 Typ D

Položka č.
Materiál Nerezoceľ
Technický materiál A2
Info
  • F max = Maximum recommended static load (values do not apply to stainless steel).
  • These conical seats are often combined with spherical washers DIN 6319-C. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these conical seats are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply these conical seats with slotted holes, but use conical seats to DIN 6319-G for this purpose.Typ D

technické údaje

Materiál Nerezoceľ
Technický materiál A2
Info
  • F max = Maximum recommended static load (values do not apply to stainless steel).
  • These conical seats are often combined with spherical washers DIN 6319-C. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these conical seats are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply these conical seats with slotted holes, but use conical seats to DIN 6319-G for this purpose.Typ D

Normy

DIN 6319-D

Produktov ({0})

  Sklad Čistá cena   PRIHLÁSIŤ SA
Nezatvárajte túto stránku. Táto správa zmizne, keď sa stránka úplne načíta.