text.skipToContent text.skipToNavigation

Fischer fis h 16x130 k manga de ancoragem


The fischer injection anchor sleeve FIS H K is the system component for the professional, mortar-saving installation of the threaded rod FIS A or internal threaded anchor FIS E in perforated brick masonry. The fischer injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS Green, FIS P Plus, and FIS P can be used with it. The optimised grating structure reduces the use of injection mortar. When the threaded rod and internal threaded anchor are installed, the mortar is pressed through the grating structure and creates a form fit with the perforated brick. This directs the load into the building material. Setting takes place in a pre-positioned installation. You can use the injection anchor sleeve to bridge non-load-bearing layers. The approvals of the various injection mortars must be observed.

Referência 41903FIS
Desenho Para plug-in
Proteção da superfície Não tratado
Auto-cortante Não
Tamanho da rosca (métrica) 8
Com flange Não
Embalado por 1

Especificações

Desenho Para plug-in
Proteção da superfície Não tratado
Auto-cortante Não
Tamanho da rosca (métrica) 8
Com flange Não
Suporte Outro
Marca Fischer
Aprovação ETA Yes
Aprovação DIBt Yes
Indicado para FIS A M8-M10
Peso por peça (g) 6.665
Código pautal 3926909790

Descrição

The fischer injection anchor sleeve FIS H K is the system component for the professional, mortar-saving installation of the threaded rod FIS A or internal threaded anchor FIS E in perforated brick masonry. The fischer injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS Green, FIS P Plus, and FIS P can be used with it. The optimised grating structure reduces the use of injection mortar. When the threaded rod and internal threaded anchor are installed, the mortar is pressed through the grating structure and creates a form fit with the perforated brick. This directs the load into the building material. Setting takes place in a pre-positioned installation. You can use the injection anchor sleeve to bridge non-load-bearing layers. The approvals of the various injection mortars must be observed.

Números do artigo

Referência 41903FIS
EAN 8001132419038
UBB 500616641600
UNSPSC 31161601
Artigo do fabricante nr 41903
Não feche esta página. Esta mensagem desaparecerá, quando a página estiver totalmente carregada.