Écrou à oreilles arrondies DIN 315 Laiton CU2/CU3

Numéro d'article
Marque	Fabory
Mode d'entraînement	Oreille
Matière	Laiton
Matière technique	CU2/CU3
Direction du filetage	Droit
Filetage	Filetage métrique
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Voir toutes les spécifications

Spécifications

Marque	Fabory
Mode d'entraînement	Oreille
Matière	Laiton
Matière technique	CU2/CU3
Direction du filetage	Droit
Filetage	Filetage métrique
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Pour ce produit, il n'y a pas de documents disponibles à télécharger

Numéro d'article Votre numéro d'article	Spécifications	Stock	Prix net	Prix par	Quantité

	Stock	Prix net		S'inscrire Précédent

Aucun résultat trouvé pour ce filtre.