text.skipToContent text.skipToNavigation
Estimado cliente, debido al periodo festivo, el envío de su pedido puede tardar un poco más de lo habitual. Planifique su pedido con más antelación. Le deseamos un feliz mes de diciembre.

Arandela cónica DIN 6319 C 87254


Artículo No. 87254AMF
Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose
Embalado por 1

Especificaciones

Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose

Estándares

DIN 6319-C

Números de artículo

Artículo No. 87254AMF
EAN 4020772087258
UBB 500617975643
UNSPSC 31161801
Artículo del fabricante nr 87254
No cierre esta página. Este mensaje desaparecerá cuando la página esté completamente cargada.