text.skipToContent text.skipToNavigation

Sechskant-Flachmuttern DIN 439b metrisch DIN 439 2 Rostfreistahl A2 035 Linksgewinde

Artikelnummer
Klasse 035
Antriebsart Hexagon
Material Rostfreistahl
Material technisch A2
Gewinderichtung Links (LH)
Gewinde Metrisches Gewinde
Info
  • do = Nominal diameter of drill bit.
  • Min. td = Recommended drilling depth.
  • hef = Effective anchorage depth.
  • tfix = Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Spezifikationen

Klasse 035
Antriebsart Hexagon
Material Rostfreistahl
Material technisch A2
Gewinderichtung Links (LH)
Gewinde Metrisches Gewinde
Info
  • do = Nominal diameter of drill bit.
  • Min. td = Recommended drilling depth.
  • hef = Effective anchorage depth.
  • tfix = Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Normen

ASME B18.2.4.5M
DIN 439-2
ISO 4035
NEN 2334-B
NF E25-405-1

Produkte ({0})

  Vorrat Nettopreis   Anmelden
Schließen Sie diese Seite nicht. Diese Meldung wird verschwinden, wenn die Seite vollständig geladen ist.