text.skipToContent text.skipToNavigation

KIPP Indexing plungers without collar, with key ring, with locknut Metrisches feines Gewinde Steel 5.8, hardened pin Black oxide

Referência
Marke Kipp
Klasse 5.8
Material Stahl
Oberfläche Schwarzoxidiert
Gewinde Metrisches feines Gewinde
Info Material: Steel grade 5.8. Key ring 1.4310, bright.Version: Indexing pin hardened, ground, black oxidized.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. The key ring is also suitable for actuation of the indexing plungers e.g. automatically (program-controlled) with the aid of a pneumatic cylinder or remote control with Bowden cables. A screw-in washer can be supplied to help screw in the indexing plungers. The washer is fitted onto the threaded sleeve so that the carrier pins engage in the slot.
Veja todas as especificações 
Ver todas as variantes

Especificações

Marke Kipp
Klasse 5.8
Material Stahl
Oberfläche Schwarzoxidiert
Gewinde Metrisches feines Gewinde
Info Material: Steel grade 5.8. Key ring 1.4310, bright.Version: Indexing pin hardened, ground, black oxidized.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. The key ring is also suitable for actuation of the indexing plungers e.g. automatically (program-controlled) with the aid of a pneumatic cylinder or remote control with Bowden cables. A screw-in washer can be supplied to help screw in the indexing plungers. The washer is fitted onto the threaded sleeve so that the carrier pins engage in the slot.

Produtos ({0})

Mostrar todas as variantes
  Stock Preço liquido   Inscrever-se
Não feche esta página. Esta mensagem desaparecerá, quando a página estiver totalmente carregada.