text.skipToContent text.skipToNavigation

KIPP Indexing plungers with threaded pin, without locknut Metrisches feines Gewinde Stainless steel 1.4305, hardened pin

Artikelnummer
Material Rostfreistahl
Material technisch 1.4305
Gewinde Metrisches feines Gewinde
Info Material: Stainless steel. Threaded sleeve 1.4305. Indexing pin 1.4034.Version: Indexing pin hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation e.g. program controlled pneumatic cylinder or by remote control using Bowden cables.
Alle Spezifikationen anzeigen 
Alle Varianten anzeigen

Spezifikationen

Material Rostfreistahl
Material technisch 1.4305
Gewinde Metrisches feines Gewinde
Info Material: Stainless steel. Threaded sleeve 1.4305. Indexing pin 1.4034.Version: Indexing pin hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation e.g. program controlled pneumatic cylinder or by remote control using Bowden cables.

Produkte ({0})

Alle Varianten anzeigen
  Vorrat Nettopreis   Anmelden
Schließen Sie diese Seite nicht. Diese Meldung wird verschwinden, wenn die Seite vollständig geladen ist.