text.skipToContent text.skipToNavigation

KIPP Indexing plungers with threaded pin, without collar, without locknut Metrisches feines Gewinde Stainless steel 1.4305, hardened pin

Cikkszám
Marke Kipp
Material Rostfreistahl
Material technisch 1.4305
Gewinde Metrisches feines Gewinde
Info Material: Stainless steel threaded sleeve 1.4305 Indexing pin 1.4034.Version: Indexing pin hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation by e.g. program controlled pneumatic cylinder or by remote control using Bowden cables. A screw-in washer can be supplied to help screw in the indexing plungers. The washer is slid beneath the disengaged mushroom knob so that the carrier pins engage in the slot.
Tekintse meg az összes specifikációt 
Az összes változat megtekintése

Műszaki adatok

Marke Kipp
Material Rostfreistahl
Material technisch 1.4305
Gewinde Metrisches feines Gewinde
Info Material: Stainless steel threaded sleeve 1.4305 Indexing pin 1.4034.Version: Indexing pin hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation by e.g. program controlled pneumatic cylinder or by remote control using Bowden cables. A screw-in washer can be supplied to help screw in the indexing plungers. The washer is slid beneath the disengaged mushroom knob so that the carrier pins engage in the slot.

Termékek ({0})

Az összes változat megjelenítése
  Készlet Nettó ár   Regisztrálj
Ne zárja be ezt az oldalt. Ez az üzenet eltűnik, amikor az oldal teljesen betöltődik.