text.skipToContent text.skipToNavigation

KIPP Indexing plungers with threaded pin, without collar, with locknut Metrisches feines Gewinde Steel 5.8, hardened pin Black oxide

Artikelnummer
Klasse 5.8
Material Stahl
Oberfläche Schwarzoxidiert
Gewinde Metrisches feines Gewinde
Info Material: Steel grade 5.8. Mushroom knob black grey thermoplastic.Version: Indexing pin hardened, ground, black oxidized.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation by e.g. program controlled pneumatic cylinder or by remote control using Bowden cables. A screw-in washer can be supplied to help screw in the indexing plungers. The washer is slid beneath the disengaged mushroom knob so that the carrier pins engage in the slot.
Alle Spezifikationen anzeigen 
Alle Varianten anzeigen

Spezifikationen

Klasse 5.8
Material Stahl
Oberfläche Schwarzoxidiert
Gewinde Metrisches feines Gewinde
Info Material: Steel grade 5.8. Mushroom knob black grey thermoplastic.Version: Indexing pin hardened, ground, black oxidized.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation by e.g. program controlled pneumatic cylinder or by remote control using Bowden cables. A screw-in washer can be supplied to help screw in the indexing plungers. The washer is slid beneath the disengaged mushroom knob so that the carrier pins engage in the slot.

Produkte ({0})

Alle Varianten anzeigen
  Vorrat Nettopreis   Anmelden
Schließen Sie diese Seite nicht. Diese Meldung wird verschwinden, wenn die Seite vollständig geladen ist.