text.skipToContent text.skipToNavigation
Dear customer, due to the holidays, shipping your order may take a little longer than normal. Please place your order on time. We wish you a happy December month.

KIPP Indexing plungers with tapered pin, premium Metrisches feines Gewinde Stainless steel 1.4305, hardened pin, plastic grip

Artikelnummer
Marke Kipp
Material Rostfreistahl
Material technisch 1.4305
Gewinde Metrisches feines Gewinde
Info Material: Stainless steel Threaded sleeve 1.4305 indexing pin 1.4034 Mushroom knob black grey thermoplastic.Version: indexing pin hardened, ground and bright.Note: Premium indexing plungers are characterized by more stringent manufacturing requirements for the indexing plungers and threaded sleeve. In addition, a centering locator that can be used to increase the positioning accuracy is provided on the threaded sleeve. These indexing plungers are used when it is necessary to prevent shifting of the locked position by transverse forces and greater positioning accuracy is required. A new locking position can only be set after the pin has been manually disengaged. When high lateral forces are to be expected, the centering locator should be used.Assembly: When using the threaded sleeve centering, it is recommended the receiving reamed hole be machined before tapping. The conical contact surface is aligned by the threaded sleeve and locking nut.
Alle Spezifikationen anzeigen 
Alle Varianten anzeigen

Spezifikationen

Marke Kipp
Material Rostfreistahl
Material technisch 1.4305
Gewinde Metrisches feines Gewinde
Info Material: Stainless steel Threaded sleeve 1.4305 indexing pin 1.4034 Mushroom knob black grey thermoplastic.Version: indexing pin hardened, ground and bright.Note: Premium indexing plungers are characterized by more stringent manufacturing requirements for the indexing plungers and threaded sleeve. In addition, a centering locator that can be used to increase the positioning accuracy is provided on the threaded sleeve. These indexing plungers are used when it is necessary to prevent shifting of the locked position by transverse forces and greater positioning accuracy is required. A new locking position can only be set after the pin has been manually disengaged. When high lateral forces are to be expected, the centering locator should be used.Assembly: When using the threaded sleeve centering, it is recommended the receiving reamed hole be machined before tapping. The conical contact surface is aligned by the threaded sleeve and locking nut.

Produkte ({0})

Alle Varianten anzeigen
  Vorrat Nettopreis   Anmelden
Schließen Sie diese Seite nicht. Diese Meldung wird verschwinden, wenn die Seite vollständig geladen ist.