text.skipToContent text.skipToNavigation

KIPP Indexing plungers with key ring, with locknut Metrisches feines Gewinde Stainless steel 1.4305, pin not hardened

Artikelnummer
Material Rostfreistahl
Material technisch 1.4305
Gewinde Metrisches feines Gewinde
Info Material: Stainless steel, threaded sleeve 1.4305, indexing pin 1.4305, key ring 1.4310, bright.Version: Indexing pin not hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. The key ring is also suitable for automatic actuation of the indexing plunger by e.g. program-controlled pneumatic cylinder or by remote control using Bowden cables.
Alle Spezifikationen anzeigen 
Alle Varianten anzeigen

Spezifikationen

Material Rostfreistahl
Material technisch 1.4305
Gewinde Metrisches feines Gewinde
Info Material: Stainless steel, threaded sleeve 1.4305, indexing pin 1.4305, key ring 1.4310, bright.Version: Indexing pin not hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. The key ring is also suitable for automatic actuation of the indexing plunger by e.g. program-controlled pneumatic cylinder or by remote control using Bowden cables.

Produkte ({0})

Alle Varianten anzeigen
  Vorrat Nettopreis   Anmelden
Schließen Sie diese Seite nicht. Diese Meldung wird verschwinden, wenn die Seite vollständig geladen ist.