text.skipToContent text.skipToNavigation

Fischer fh ii 15/15 sk zp Hochleistungsanker


The fischer high-performance anchor FH II SK with countersunk head is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorb

Gesamte Beschreibung 
Artikelnummer 44920FIS
Durchmesser
Verschraubungssystem Innensechskant
Länge 100
Gewindeart Metrisch
Gewindegröße (metrisch) 10
Alle Spezifikationen anzeigen 
Verpackt pro 1

Spezifikationen

Durchmesser M10
Verschraubungssystem Innensechskant
Länge 100
Gewindeart Metrisch
Gewindegröße (metrisch) 10
Durchmesser des Bohrlochs (mm) 15
Anzahl der Unterlegscheiben 0
Befestigungsart Andere
Aussteifung Geteilter Anker
Wirksame Verankerungstiefe (mm) 70
Anzahl der Muttern 0
Durchsteckmontage Ja
Vorpositionierter Einbau Nein
Abstandsmontage Nein
Max. Klemmdicke (mm) 15
mit Bund Nein
Modell der Verankerung Außengewinde
Info
  • do = Nominal diameter of drill bit.
  • Min. td = Recommended drilling depth.
  • hef = Effective anchorage depth.
  • tfix = Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Beschreibung

The fischer high-performance anchor FH II SK with countersunk head is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II SK with countersunk head is ideally suited to fix railings, staircases, and ladders in cracked and non-cracked concrete.

Artikelnummern

Artikelnummer 44920FIS
EAN 4006209449202
UBB 500616647565
UNSPSC 31162101
Hersteller Artikel Nr 44920
Schließen Sie diese Seite nicht. Diese Meldung wird verschwinden, wenn die Seite vollständig geladen ist.