text.skipToContent text.skipToNavigation
Dear customer, due to the holidays, shipping your order may take a little longer than normal. Please place your order on time. We wish you a happy December month.

Fischer fbn ii 16/25 hdg Bolzenanker


The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The

Gesamte Beschreibung 
Artikelnummer 507598FIS
Durchmesser
Länge
Schlüsselweite (mm) 24
Gewindelänge (mm) 89
Min. Bohrlochtiefe (mm) 129
Alle Spezifikationen anzeigen 
Verpackt pro 10
Nur komplette Verpackung

Spezifikationen

Durchmesser M16
Länge 89 mm
Schlüsselweite (mm) 24
Gewindelänge (mm) 89
Min. Bohrlochtiefe (mm) 129
Länge 145
Gewindeart Metrisch
Gewindegröße (metrisch) 16
Durchmesser des Bohrlochs (mm) 16
Anzahl der Unterlegscheiben 1
Befestigungsart Mutter
Aussteifung Geteilter Anker
Anzahl der Muttern 1
Durchsteckmontage Ja
Vorpositionierter Einbau Ja
Abstandsmontage Nein
Max. Klemmdicke (mm) 25
Oberflächenschutzanker Feuerverzinkt
mit Bund Nein
Befestigung mit Aufweitwerkzeug Nein
Modell der Verankerung Außengewinde
Marke Fischer
Schlüsselmerkmale Functioning - The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions. - Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). - When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall. - The head embossing offers a simple control of the anchoring. - In the case of series installation, we recommend using the FABS bolt anchor setting tool.
Info
  • do = Nominal diameter of drill bit.
  • tfix = Grip range.
  • hef = Effective anchorage depth.
  • Min. td = Recommended drilling depth.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Beschreibung

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The bolt anchor is made of hot-dipped steel and is suitable for railings, handrails or consoles.

Artikelnummern

Artikelnummer 507598FIS
EAN 4048962087765
UBB 500616669676
UNSPSC 31162101
Hersteller Artikel Nr 507598
Schließen Sie diese Seite nicht. Diese Meldung wird verschwinden, wenn die Seite vollständig geladen ist.