text.skipToContent text.skipToNavigation

Fischer fbn ii 12/5 (12x84) k r Bolzenanker


The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel

Gesamte Beschreibung 
Artikelnummer 508011FIS
Durchmesser
Länge
Schlüsselweite (mm) 19
Min. Bohrlochtiefe (mm) 75
Länge 84
Alle Spezifikationen anzeigen 
Verpackt pro 1

Spezifikationen

Durchmesser M12
Länge 39 mm
Schlüsselweite (mm) 19
Min. Bohrlochtiefe (mm) 75
Länge 84
Gewindeart Metrisch
Gewindegröße (metrisch) 12
Durchmesser des Bohrlochs (mm) 12
Anzahl der Unterlegscheiben 1
Befestigungsart Mutter
Aussteifung Geteilter Anker
Anzahl der Muttern 1
Durchsteckmontage Ja
Vorpositionierter Einbau Ja
Abstandsmontage Nein
Materialqualität Anker Andere
Oberflächenschutzanker Unbehandelt
mit Bund Nein
Befestigung mit Aufweitwerkzeug Nein
Modell der Verankerung Außengewinde
Schlüsselmerkmale Functioning - The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions. - Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). - When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall. - The head embossing offers a simple control of the anchoring. - In the case of series installation, we recommend using the FABS bolt anchor setting tool.
ETA-approval Yes
Info
  • do = Nominal diameter of drill bit.
  • tfix = Grip range.
  • hef = Effective anchorage depth.
  • Min. td = Recommended drilling depth.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Beschreibung

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside.

Artikelnummern

Artikelnummer 508011FIS
EAN 4048962091120
UBB 500616670989
UNSPSC 31162101
Hersteller Artikel Nr 508011
Schließen Sie diese Seite nicht. Diese Meldung wird verschwinden, wenn die Seite vollständig geladen ist.