Porca de orelhas DIN 315 Latão CU2/CU3 M24

Referência
Diâmetro
Encaixe	Orelhas
Material	Latão
Material técnico	CU2/CU3
Direção da rosca	Direita
Rosca	Métrica
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Veja todas as especificações

Embalado por 5

Apenas embalagem completa

Ver todas as variantes

Especificações

Diâmetro	M24
Encaixe	Orelhas
Material	Latão
Material técnico	CU2/CU3
Direção da rosca	Direita
Rosca	Métrica
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Download como PDF Imprimir

Referência A sua referência	Especificações	Stock	Preço liquido	Preço por	Quantidade

	Stock	Preço liquido		Inscrever-se Anterior

Não foram encontrados resultados para este filtro.