text.skipToContent text.skipToNavigation
Cher client, en raison des fêtes, l'expédition de votre commande peut prendre un peu plus de temps que d'habitude. Nous vous souhaitons de belles fêtes de fin d'année.

Rondelle à portée sphérique DIN 6319 C 81844


Numéro d'article 81844AMF
Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose
Emballé par 1

Spécifications

Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose

Normes

DIN 6319-C

Numéros d'articles

Numéro d'article 81844AMF
EAN 4020772081843
UBB 500617922272
UNSPSC 31161801
N° Article du fabricant 81844
Ne fermez pas cette page. Ce message disparaîtra lorsque la page sera entièrement téléchargée.