Concrete anchoring screw countersunk type SK Ultracut Carbon steel, hardened Ocynkowane

Referência
Marka	Fischer
Obróbka powierzchni	Ocynkowane
Gwint	Concrete thread
Info	d = Drill diameter. M_{d (max.)}= Maximum allowable torque in Nm for assembly with an impact wrench. h_(nom.)= Minimum anchoring depth. h_(min.)= Minimum hole depth. t_fix= Grip range. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25 and with the minimum anchoring depth. Final calculations should comply with the complete European Technical Approval (ETA 15/0352), this approval is also available on request.Ultracut

Veja todas as especificações

Especificações

Marka	Fischer
Obróbka powierzchni	Ocynkowane
Gwint	Concrete thread
Info	d = Drill diameter. M_{d (max.)}= Maximum allowable torque in Nm for assembly with an impact wrench. h_(nom.)= Minimum anchoring depth. h_(min.)= Minimum hole depth. t_fix= Grip range. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25 and with the minimum anchoring depth. Final calculations should comply with the complete European Technical Approval (ETA 15/0352), this approval is also available on request.Ultracut

Para este produto não há documentos disponíveis para download

Produtos ({0})

Mostrar todas as variantes

Referência A sua referência	Especificações	Stock	Preço liquido	Preço por	Quantidade

	Stock	Preço liquido		Inscrever-se Anterior

Não foram encontrados resultados para este filtro.