Stud metal end ≈ 1,25d BSW Steel Plain 5.6

Numero articolo
Marchio	Fabory
Class	5.6
Material	Steel
Thread direction	Right
Surface treatment	Plain
Thread	British Standard Whitworth
Info	Depending on availability, class 5.8 can be supplied instead of class 5.6. Whitworth thread (BSW) is not internationally recommended. It is advised to use metric (M) thread instead. ATTENTION: when ordering these studs the proper designation is d x L, e.g. stud 5/16X25, where the working length L = 25 mm and the thread length on the metal end e = 10 mm. The overall length of the stud is 25 + 10 = 35 mm. The thread length on the nut end b = 18 mm. The thread on the metal end is made with a "transition fit", which prevents loosening of the metal end of the studs during disassembly. These studs, with a metal end ≈1,25d, have many applications, but are mainly intended for use in cast iron counterparts.

Visualizza tutte le specifiche

Specifiche

Marchio	Fabory
Class	5.6
Material	Steel
Thread direction	Right
Surface treatment	Plain
Thread	British Standard Whitworth
Info	Depending on availability, class 5.8 can be supplied instead of class 5.6. Whitworth thread (BSW) is not internationally recommended. It is advised to use metric (M) thread instead. ATTENTION: when ordering these studs the proper designation is d x L, e.g. stud 5/16X25, where the working length L = 25 mm and the thread length on the metal end e = 10 mm. The overall length of the stud is 25 + 10 = 35 mm. The thread length on the nut end b = 18 mm. The thread on the metal end is made with a "transition fit", which prevents loosening of the metal end of the studs during disassembly. These studs, with a metal end ≈1,25d, have many applications, but are mainly intended for use in cast iron counterparts.

DIN	939

Per questo prodotto non sono disponibili documenti da scaricare

Numero articolo Il tuo numero articolo	Specifiche	Stock	Prezzo netto	Prezzo per	Quantità

	Stock	Prezzo netto		Iscriviti Precedente

Nessun risultato è stato trovato per questo filtro.