SHA MS

The fischer installation base MS is for suspending the fischer cable harness SHA. When using the ClipFix SD to fix the installation base, no additional screw is required. During mounting with the Hammerfix N, the nail screw causes the plug sleeve to expand against the drill hole wall when it is hammered in.

Descrizione completa

Numero articolo	58141FIS
Lunghezza
Adatto per l'integrità del circuito	No
Marchio	FISCHER
Caratteristiche principali	Functioning - Cable bundles can be laid in the cable harness SHA. The seal makes it easy to lay cables at a later date. - The cable harness SHA can either be affixed with ClipFix plus, installation base MS or with plugs and screws. - Several SHA cable harnesses can be combined below one another. - The SHA cable harnesses can also be lined up adjacent to one another with the connection piece SHA KP. - The maximum installation distance of 80 cm must not be exceeded. - Temperature resistance once installed from -20°C to +80°C.

Visualizza tutte le specifiche

Confezionato per 1

Specifiche e standard
Download

Specifiche

Lunghezza	27 mm
Adatto per l'integrità del circuito	No
Marchio	FISCHER
Caratteristiche principali	Functioning - Cable bundles can be laid in the cable harness SHA. The seal makes it easy to lay cables at a later date. - The cable harness SHA can either be affixed with ClipFix plus, installation base MS or with plugs and screws. - Several SHA cable harnesses can be combined below one another. - The SHA cable harnesses can also be lined up adjacent to one another with the connection piece SHA KP. - The maximum installation distance of 80 cm must not be exceeded. - Temperature resistance once installed from -20°C to +80°C.

Scarica PDF Stampa

Descrizione

Numeri di articolo

Numero articolo	58141FIS
EAN	4006209581414
UBB	500616761077
UNSPSC	31162905
Nr articolo produttore	58141

Per questo prodotto non sono disponibili documenti da scaricare