Retaining ring for bores - normal type DIN 472 Stainless spring steel 1.4122/1.4021

Numero articolo
Marchio	FABORY
Material	Stainless spring steel
Material technical	1.4122/1.4021
Info	Other types of stainless steel than specified (but with equal properties) may be supplied at the discretion of the manufacturer. Avoid contact with chloride containing (cleaning-) liquids in order to reduce the risk of chloride induced stress corrosion cracking. d₄ is the minimum required installation space. During assembly it is essential to not over-compress the rings, a maximum compression of 0,99 x d₁ is recommended. For proper installation use pliers with spread limiter or assemble with the aid of a cone.

Visualizza tutte le specifiche

Specifiche

Marchio	FABORY
Material	Stainless spring steel
Material technical	1.4122/1.4021
Info	Other types of stainless steel than specified (but with equal properties) may be supplied at the discretion of the manufacturer. Avoid contact with chloride containing (cleaning-) liquids in order to reduce the risk of chloride induced stress corrosion cracking. d₄ is the minimum required installation space. During assembly it is essential to not over-compress the rings, a maximum compression of 0,99 x d₁ is recommended. For proper installation use pliers with spread limiter or assemble with the aid of a cone.

Standard

DIN	472
BS	3673-4
NF	E22-165

Scarica informazioni aggiuntive

Prodotti ({0})

Mostra tutte le varianti

Numero articolo Il tuo numero articolo	Specifiche	Stock	Prezzo netto	Prezzo per	Quantità

	Stock	Prezzo netto		Iscriviti Precedente

Nessun risultato è stato trovato per questo filtro.