MAXXFAST Hammerset anchor Steel Zinc plated

Numero articolo
Material	Steel
Surface treatment	Zinc plated
Thread	Metric thread
Info	d_o= Nominal diameter of drill bit d_w= Diameter of clearance hole in the fixture h₁= Depth of drilled hole to deepest point h_c= Minimal thickness of concrete element e = Bolt length to be threaded S_min.= Minimal spacing C_min.= Minimal edge distance N_rec= Recommended load in kN T_inst= Tightening torque in Nm The allowable load (N_rec) is valid for one single anchor, at non-cracked concrete (pressure zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_min.and C_min.are taken in to account.

Visualizza tutte le specifiche

Specifiche

Material	Steel
Surface treatment	Zinc plated
Thread	Metric thread
Info	d_o= Nominal diameter of drill bit d_w= Diameter of clearance hole in the fixture h₁= Depth of drilled hole to deepest point h_c= Minimal thickness of concrete element e = Bolt length to be threaded S_min.= Minimal spacing C_min.= Minimal edge distance N_rec= Recommended load in kN T_inst= Tightening torque in Nm The allowable load (N_rec) is valid for one single anchor, at non-cracked concrete (pressure zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_min.and C_min.are taken in to account.

Per questo prodotto non sono disponibili documenti da scaricare

Numero articolo Il tuo numero articolo	Specifiche	Stock	Prezzo netto	Prezzo per	Quantità

	Stock	Prezzo netto		Iscriviti Precedente

Nessun risultato è stato trovato per questo filtro.